Land Area Calculator and Converter

Land Area Calculator and Converter – In this Artcle we listed all Land Area Calculator and Converter  for Quick Find.

Land area is the area in square kilometers of the land-based portions of standard geographic areas. Land area data are unofficial and are provided for the sole purpose of calculating population density.

• Square Feet
• Square Meter
• Square Yards
• Hectares
• Bhighas
• Acres
• Guntha
• Grounds
• Biswa
• Kanal
• Ares

What Is Area Calculator?

An area calculator is an online tool that helps you convert one unit of measurement of an area into another. This land unit converter can be used to convert between numerous units of measurement like sq. feet, sq. metre, sq. yards, hectares, acres, etc.

Conversion Units For The Area Converter

Some of the units that a land area calculator supports are mentioned below –

1. Square Feet

Square feet, sq. ft., or ft2 can be defined as the area of a square with sides measuring 1 foot. It is part of the US customary unit and imperial unit.

Square Metre

Square metre, sq. m, or m2 is similar to square feet; however, the sides of the square in this case are 1 metre (3.28084 foot). It is the SI derived unit used to measure area.

Square Yards

Square yards, sq. yd. or yd2 can be defined as the area of a square with sides measuring 1 yard (3 foot). This unit has been replaced by square metre.

However, it is still in use in the following countries –

• India (as guz).
• United Kingdom.
• United States.
• Canada.

Hectare

Hectare or ha can be defined as the area of a square with sides measuring 100 metres. It is the only unit in use within SI even though it is a non-SI unit.

Hectare is primarily used for the measurement of large areas of land like forests, agricultural plots, etc. The European Union primarily uses this unit.

With an area unit converter, you can convert hectare into acre, bigha, sq. m, sq. ft. and more.

Bigha

Bigha is traditionally used in India when measuring plots. The unit has no standard size. Size on one bigha can equal 1,500 to 6,771 sq. m. the unit can equal 12,400 sq. m in some places. Biswa and katha are the subunits of bigha. These units also don’t have a standard size.

The size of one bigha in few Indian states equals –

• Assam – 14,400 sq. ft.
• Bihar –
• Uttarakhand – 756.222 sq. yd.
• West Bengal – 1,600 sq. yd. (standardised during British Raj).

An online area converter can be used to convert bigha to sq. ft., sq. m, hectare or acre and vice versa.

• Bigha, Kattha, Dhur to Dismil Calculator

Acre

Acre is part of the imperial US customary units. One acre equals 4,840 sq. yd. or 0.405 hectare. 640 acres make 1 mile.

Acre is primarily used in the United States and the United Kingdom. It is also used in countries under former British Colonial rule. In India, acre is primarily used to measure agricultural land.

A land area converter can convert measurements of acre into sq. ft., sq. m. and other units.

Guntha

Guntha or gunta is primarily used to measure plots in Northern India. In India, 40 gunthas make 1 acre. Also, 1 guntha equals 1,089 sq. ft.

Ground

Ground is unit of measurement in India. 1 ground equals 203 sq. m. Then the unit is more commonly used in the realty sector.

Biswa

Biswa is a unit with no standard size throughout the country. Commonly, 1 biswa equals 1,350 sq. ft. In Uttar Pradesh, 1 bigha equals 10 kaccha biswa and 10 pucca biswa.

Kanal

Kanal is most commonly used in Northern India. 1 kanal equals 1/8th of an acre or 4,500 sq. ft. or 605 sq. yd.

Ares

Ares is a unit of the metric system. 1 are equals 0.0247 acre or 100 sq. m. 100 ares equal 1 hectare. Are was replaced by hectare during the rationalisation of the metric system back in 1960.

1. Square Feet to Square Meters Calculator – ft² to m² Conversion
2. Square Meter to Feet Calculator
3. Calculate Dismil to Square Feet (Sq Ft) – Best Converter
4. Online Bricks Calculator 2020 Best and Most Accurate

Most Common Area Units Used in Daily Life

Conversion Tool Calculator is a free online tool that displays the conversion of one unit to the other unit in the metric system. A unit is defined as the standard measure of a quantity. It can also be defined for measurements.

For example, the temperature is measured in degrees Celsius/ Fahrenheit, time is measured in seconds/minutes/ hour, and so on.

Conversion tool is easy to use and can get the result instantly. Once the value is entered in the input field, the converted value will be displayed in the output with greater accuracy. In Maths, Physics, and Chemistry, we need a lot of unit conversion tools to make the process simpler.

Online conversion tool changes the measured quantity of one unit to another unit of measure without changing the relative amount. The process of converting from one unit to another is called a unit conversion. It is also sometimes called dimensional analysis.

Generally, in Science and Engineering, it makes use of different units.

For example, the mass can be defined using different units, such as grams, tons, pounds; length can be defined using different units, like meter, inches, feet and so on.

In case, if you’re working with the set of units, and one unit is different among them, you won’t get the correct answer. In such a case, the conversion of the unit is required.

Frequently Asked Questions

You can Use this page or bookmark this page for future update.